Actually this a compilation of my previous posts in three parts...with some added points at the end
To start...just like any other law, the enforcement
and monitoring by the regulator is also crucial to ensure the good impacts that
could be resulted from EMEER 2008 compliance.
EC at least need to
have the in-house capacity and competent people in EE implementation who at
least can guide the affected installations and REEMs for them to be able to
look into the actual spirit behind EMEER 2008 rather than just for compliance.
EC's roles in educating the installations in directly linked to REEMs that they
have certified as their "representative" because if REEMs are not
able to convince the installations about the benefits from compliance with
EMEER 2008, EC will be left alone to do it.
This is another one
reason why REEMs are so crucial to ensure the success of EMEER2008
implementation.
Now, let us examine their
effectiveness to promote EE...at least at with installations that they
appointed according to the requirements of EMEER 2008.
The Efficient Management of Electrical Energy
Regulations was effective from 15 Dec 2008 and it affects consumers and private
licences that consume or generate more than 3,000,000kWh in total in 6
consecutive months at any duration from the effective date.
Two key features in
the regulations are:
1. Affected
consumers/private licensees must appoint Registered Electrical Energy Manager
(REEM) with EC and...
2. Also required to
submit energy management info and updates in a scheduled report to EC in every
6 months
Key duties of REEM in efficient management of energy in general are:
1. To advise on how to implement
2. To audit
3. To monitor the implementation
4. To supervise records and documents are kept
5. To ensure timely submission of the scheduled report by the
installation
Currently there are about almost 2000 installations
affected by the regulations and I am aware that EC has started to send warning
notices to those who have not comply since 2011
please log on into
EC's website www.st.gov.my for more info
 |
| My REEM Certificate that I finally obtained in early 2012 |
Based on feedback by some affected installations
and also REEMs in the market, we can classify REEMs in few categories now:
1. Appointed as REEM at the installation where he/she is working now (I
guess the most of REEMs) for compliance
2. Appointed as the third party as REEM by affected installations
they can be appointed by more than one installation. This group normally consultants.
3. Not appointed any installation and just keep the certificate as one
of their competency recognitions
Comparatively with
other countries that have similar competency certificate by EE laws such as Japan
and India, to become REEM is much easier due to a very "minimum"
requirements in EMEER 2008 for academic qualifications, knowledge and
experiences in EE. All
that they need to have are at least a degree in engineering, architecture and
science with experiences in energy management from 6 months to one years plus
an interview session before they can be registered if they pass the interview.
The main concern
is....how competent of REEMs in promoting and assisting to implement EE for the
affected installations and for other intensive energy users as a whole.
Functions and duties of REEM in EMEER 2008 are very
general and in can be interpreted in many ways if not being well explained and
guided by the regulator. The key objectives of EMEER 2008 is to ensure energy resources (electrical)
is managed efficiently and REEMs are expected to play the critical role for
that to happen...
How many installations for REEM can be appointed?
How much should REEM charge for each installation? How much should I
for REEM services? Will REEM help to save energy? Is energy audit is compulsory
and if yes, what type of energy audit that need to be carried out? Detailed,
investment grade or walk through?
It is very crucial for
REEMs to be able understand their "real" functions and duties
clearly and convincingly since provisions stated in EMEER 2008 are very brief
and general...their ability to do that normally will determine what type of
REEM they would be that will lead to what type services to delivered to
installations that agreed to appoint them.
To me...the compliance
of affected installations towards EMEER 2008 should only be the minimum
requirement for REEM to fulfil which is to verify reports that need to be
submitted to EC in every six months. Their further functions should derive
from the regulation 16 in EMEER 2008 which is not fully understood the
owner of the installation who are mostly new or unaware of it until they
received the notification from EC.
To my
understanding, the spirit of EMEER 2008 is more to give the freedom to each
installation to manage their energy efficiently. It can be seen with so many
general provisions and minimum mandatory requirements that need to be complied.
That actually gives the flexibility to REEM to figure out the best or the most
practical package to offer other than just for compliance...
We will look into this topic further since this
will determine the tangible values and benefits in the appointment of REEM in
the eye of the installation's owner with the amount of fee that they are
willing to pay.
From the market information and communications with
some of fellow REEMS ...there are REEMs being paid from about RM500 per month
to RM50k+++ per year for services offered to affected installations with about
400 installations have appointed REEM.There are REEMs appointed to many
installations and the highest number for one REEM that being told to me is
about 20 installations.
I am not going to question about the fees or how many
installations for each REEM can be appointed, as a REEM myself, I
would to discuss on how every REEM will or should position themselves in the
market and how as REEMs, and then we would be able to promote efficient
management of energy that will benefit the installation itself and the country
as a whole. It's free market and everyone has absolute rights to find the best
way to secure clients.
There are few types of installations too when it
comes to on how they look at EMEER 2008.Generally I would like to categorize
them as follows:
1. just would like to comply to avoid issues
with the authority, their certification requirements and etc. Management of
energy it is not so critical to them especially for purely local companies.
2.Ready to comply since energy management have
been implemented for many years
3.Want to comply but delayed their actions due
to other important commitment and in the same time findings it hard to get
REEMs due to insufficient supply and unsure about how much values REEM will
bring with the costs that they need to fork out. They are also raised concerns
on lack of reference/guidance/benchmark on the scope of works of REEM to
deliver with proposed fees.
4. With wait and see attitude...trying to delay
it if possible
5.Just do not care at all
6. The management are not aware about it at all
7. Keen to comply and immediately and taking
necessary actions to indicate their on-going commitment as "green" or
law abiding organizations
There are may be more but what I am going to
highlight here are...
firstly, for different type of organizations, REEMs have
to have different approaches to sell themselves to get appointed with the
suitable scope of works to fulfil each installation's requirement and their
perception towards EMEER 2008.
Secondly, how REEMs position themselves in the
market will create the perception towards them among the affected installations
as a whole and companies that appointed them, fellow REEMs and also from the
regulator's point of view.
I came across installations that we have EE projects with them that
shared with us some of their experiences with REEMs that they have appointed.
For companies that appointed REEMs from their qualified internal personnel,
normally they do not have that many issues with their REEMs. Negative comments
normally come from companies that appointed external REEMs that could not see
or realize the benefits despite paying certain amount of fees on monthly basis
other than complying to EMEER 2008.
Personally, there
are companies send me enquiries on REEM services that I am also offering as one
of our consultancy services. I would say almost all of them just interested to
appoint REEM for the purpose of compliance only and looking for the "best
price" which normally the cheapest price.
Some of them already
received warning notices but still do not take it as an urgent matter yet. Why?
I will try to elaborate on the later or sometime in the future posts since my
focus now in on REEM.
Both REEMs and
affected companies need to be guided and the only party who can do that is the
regulator itself because what is happening now is the true spirit of EMEER 2008
is not fully understood for them to see the positive impacts that could be
resulted from the enforcement of the law. There must me a synchronized efforts
among the regulator, REEMs and affected companies to act on roles as specified
in the law for us to see the actual desired impacts from the introduction
of EMEER 2008.
The diagram below
summarized roles that need to be played by each actor in EMEER 2008
implementation to enable the law to achieve its objectives.
|
Relationship and roles of key
actors in EMEER 2008 implementation
|
Obviously the biggest roles that need
to be played are by the regulator especially in the early part of the
implementation. The regulator must have strong and competent EE capacity within
the organization to enable them to perform their functions effectively
especially when installations and REEMs refer to them for clarity about
provisions in the law and assistance on how to practically move towards the
compliance.
The other biggest challenge of the
regulator is to create significant interest among the technical people to apply
to become REEM, to register them and to ensure REEMs will play their roles
after that. With less than 200 REEMs registered at this moment, it definitely
insufficient for the market and with many of REEMs are based on their existing workplace
as a full time employees, the total number of REEM that would be able to ensure
at least the compliance is far less than enough. This has already created
unhealthy environment in REEM market when the demand is too much more than the
supply where some REEMs are willing to rush the quantity rather than the
quality of services delivered.
On-going campaign to increase
awareness on the potential of new career and business opportunities is required
to attract more EE professionals, practitioners and others with related EE
working experience to apply to become REEM.
To become REEM under EMEER 2008, you do not have to a technical specialist or
specialized in other areas in EE. Then, appointment of REEM by any company for
the purpose of compliance only will not guarantee any energy cost reduction
yet. However, being a specialist in certain areas especially on how to identify
and implement energy cost saving measures definitely will bring more values to
companies appointed them as REEM at their facilities. I will try to share some
tips in my future postings on how easy to become REEM is you already met the
qualification requirements and experiences in energy efficiency.
REEMs normally will
ask and share information and experiences their fellow REEMs on what they
actually do to secure, deliver their services and to maintain their clients.
Meanwhile companies will normally refer to the regulator to confirm about the
requirements to comply and then REEMs in the market to gauge what type of
services could be offered and fees. Companies also will ask other companies and
finally they will decide based on their actual needs to appoint REEM. Without a
proper advice and guidelines, companies may end up appointing REEM with
their own reasons and not in tandem with the objectives of EMEER 2008
implementation. This scenario must closely monitor by the regulator and to
close the gaps on different perceptions and assumptions by companies and REEMs
about complying towards EMEER 2008.
The general
understanding about EMEER 2008 is they need to implement energy saving
measures which is not totally correct since the focus of the law is on the
management of energy at the affected installations. This is where the
regulator needs to explain clearly and extensively to them that the law is
not all about energy savings. EMEER 2008 is actually focusing on the management
component of total energy management solutions which also cover the technical
component which directly related to energy saving measures. When the energy resources
are being managed efficiently, it will subsequently will result in identifying
ways to eliminate wastage that will improve energy resources utilization in the
facilities.
To put so much emphasis on energy
savings will create the impression of quickly to jump into possible immediate
measures to be implemented if they need to comply to EMEER 2008 and measures
can be quickly associated with costs to implement too which shift the attention
to EE technologies(products).
TYPES OF REEM
To
become a REEM under EMEER 2008, you do not have to a technical specialist or
specialized in other areas in EE. Then, appointment of REEM by any company for
the purpose of compliance only will not guarantee any energy cost reduction
yet. However, being a specialist in certain areas especially on how to identify
and implement energy cost saving measures definitely will bring more values to
companies appointed them as REEM at their facilities.
Now I would like to elaborate further on what type
of REEM that anyone possibly could be. To be realistic too, monetary factor
would be one of the key factors among others.
Another key factor is what is the
market(installations affected by EMEER 2008) expects from REEMs which very much
depending on how they see the implementation of the law as I indicated in the
previous post.
I am not trying determine to which one is
right or wrong but would like to bring the attention to achieve goals from the
implementation of EMEER 2008 other than potentials business opportunities.
The figure below outlines on how I
anticipate the scope of services that could be offered and roles to be played
by REEMs:
- To me, when
monetary benefit is the ultimate goal by being REEM, promising to ensure the
basic compliance requirements is met would match the need of companies which
have the same interest. For these types of REEMs, their scope will only require
them to be appointed by the company and sign the declaration form (Form B) in
every six months. All EEM works generally will be up to the company with
appointed REEM will provide minimal inputs.
- With the minimum works required,
fees for this type of scope normally will be minimum too and extra scopes will
require the company to be charged separately upon request by the company. There
will be no fixed commitment such as of number of visits, type of reporting or
details of service level agreement by the REEM. With
this approach, one REEM would be able to offer their service to many companies.
- I do heard now some
companies that are now questioning the value REEMs appointed by them who are
not really doing much to help them to save energy despite being paid a fixed
fee every month. For some companies, they are all right with it since that is
exactly their requirement, just to comply with EMEER 2008.
- For this type of scope, generally
REEMs are not required to be well-versed in overall concept of energy management
and even in energy conservation measures too because they do not expect
themselves to deliver that although their client may(indirectly due to
the minimum fee agreed).
- ·
Efficient
Energy Management(EEM)Services
- This is an
enhanced scopes of REEM with the key addition is about assisting the company to
have a comprehensive energy management system (EnMS) implemented at agreed time
frame. The energy management system will cover both management and technical
solutions that finally will lead to reduction of energy consumption and costs.
This may involve adoption of recognized energy management standards such as
ISO50001 standard.
- REEMs who are
able to offer this EEM services have to be familiar on the key concepts of EnMS
from the development, implementation and evaluation for continual improvement.
Bear in mind the goal is not about to lead or to get the company to be
certified but to have a system in place within the company that would enable
them to achieve their energy targets and then sustain it with or without REEM.
The effective implementation EnMS is expected to enable the company to save
energy costs at NO or LOW cost measures to start with before they can embark
into bigger financial investments on energy saving measures which
will lead them to have more significant savings.
- REEMs are
expected to be more involved with the company and for easier understanding of
commitment required from both parties, REEMs are advisable to prepare and
submit their energy management plan to develop and implement EnMS which to be
mutually agree by both of them too.
- Since there are more roles and time to be spent, we expect higher fees to be proposed and
justified by REEM to their potential clients and then to convince them to
accept the proposed scopes.
- Normally, if
both parties agreed with the proposed plan and fees, REEMs have the biggest
challenge to deliver to justify fees that being charged. This is because, the
company will have some more inputs at the later stage after the appointment
made from their contacts on scope that being offered by other REEMS for
compliance alone.
- The failure of
REEMs to prove their value to their clients with have significant impact on the
perception of affected company towards other REEMs since with this type
of scopes, REEMs are expected to be specialist sin EnMS or energy efficiency
measures who will advise and guide the company in efficient management of
energy.
·
EEM mentor
- Further
the services offered for the above two types of REEMs, EEM Mentor would have the
approach and strategy to deliver our REEM services to cover the following:
- REEM will
identify competency requirements and develop in-house competencies through
training programs on EnMS and EE related topics; and
- REEM will
be a mentor to for in-house candidates who will apply to be a REEM
with Energy Commission and will assume the functions and duties as REEM
after the appointed external REEM services contract ended
- The external REEM
may play advisory roles or for specialized services upon request by the company
on need basis.
- Generally,
this type of REEMs would only willing to be appointed at certain numbers of
companies only at one particular duration which will make them eligible to
offer their services at 3-4 companies at one time. This is due to the need for
them to give due attention to each company which require constant assistance
and guidance before REEM's tasks could be finally handed over to the in-house
REEM towards the end of their contract
At this
stage, it is hard to gauge what type REEMs are currently the majority in the
market since the actual scope of services is only known between REEMs and their
respective clients. As someone who currently holds that REEM registration and
to those who have intention to get one, it is entirely up to you to decide what
type of REEM are you or you will be.
In a bigger picture, the effective implementation of EMEER 2008 could also contribute to the growth of our economy and reduction of carbon dioxide gas emission through the reduction of energy consumption with efficient management of energy at affected installation as summarized in the figure below.
.jpg)
.jpg)
.JPG)
